HillTip IceStriker™ Pickup Sand & salt spreader

IceStriker™ 800-1150 Spreader for 1/2 to 3/4 ton pickup trucks, utility vehicles.

SPREADER DESIGN

Our IceStriker™ 12V electric sand and salt spreader is built to meet the requirements of the 1/2 to 3/4 ton pickup truck segment. The lightweight hopper body made of polyethylene, and mounted parts in stainless steel, provides you long lasting protection against corrosion and rust. The IceStriker™ spreader and controller system helps you save money and reduces the impact on the environment, while achieving the same de-icing results as before.

HTrack Salt Spreader tracking system

OPTIONAL TRACKING SYSTEM

This spreader is compatible with our optional HTrack™ tracking software. You can track and manage all of your spreading devices and snowplows online on your computer, tablet or smartphone. The program shows treatment route and spreading details on the map in real-time or between specific time intervals. Spreading route details such as speed, GPS location and material used can be summarized and generated as PDF reports.

Read more

You can reduce the salt usage with up to 30% with the optional liquid pre-wet system, and by 75% when using salt brine solution as de-icing method! This is direct savings for you and the environment.
We help you to make a clean and safe society !

FUNCTIONS AND ACCESSORIES


COLOR SCREEN CONTROLLER

The controller lets you customize your spreading session according to your current situation. Automatic GPS-speedcontrol adjusts the amount of spreading material ( oz/sq ft) according to your vehicle speed, while manual mode lets you insert a fixed auger speed. The controller additionally collects and saves essential data to an USB memory, allowing you to generate spreading reports. The controller also makes it easy to turn on functions, like vibrator, beacon and work light, from inside the cabin.

IceStriker spreader chute

FLIP UP CHUTE

Stainless steel flip-up chute, designed for spreading salt with high humidity

INVERTED V

Inverted-V helps reduce heavy start-up loads on the auger. All in stainless steel.

IceStriker spreader vibrator

VIBRATOR

Vibrator prevents bridging and de-icing material from clogging by shaking the inverted Vee.

Flip-up chute for salt spreaders

AUGER

The 2.5″ stainless steel auger gives you an even flow of material to the spinner.

IceStriker spreader tarp mechanism

TARP MECHANISM

Two-piece tarp mechanism, prevents spill off into truck bed when filling the spreader.

IceStriker spreader top screen

TOP SCREEN

Top screen prevents rocks and big material chunks from getting into the hopper.

ALSO INCLUDES

  • Built-in tie-down loops for strapping unit to truck
  • Hopper body includes molded alternate license plate area
  • The motor is mounted inside a sealed weather-resistant enclosure, and requires no pulleys, sprockets, belts or chains
  • Includes an accessory wire for optional work light, beacon light and rear camera that can be activated from the standard controller
IceStriker spreader bladder tank

BLADDER TANK

Bladder tank stores additional liquid inside hopper

IceStriker spreader warning light

BEACON WARNING LIGHT

To increase visibility and keep you safe in the traffic

IceStriker spreader work light

LED WORK LIGHT

Adjustable work light at the rear of the spreader improves visibility

IceStriker spreader leg stand

LEG STAND

For practical storing and easier removal and installation

IceStriker spreader data-logging

ONLINE DATA-LOGGING

Online data-logging transfer via controller

OTHER OPTIONS

  • License plate kit

TECHNICAL SPECIFICATIONS

Spreader specifications and dimensions

SPREADER SPECIFICATIONS

MODEL8001150
Overall Width A 47"47"
Width B35"35"
Minimum truck bed length C4 ft5.7 ft
Height D36"36"
Capacity, struck0.7 cu yd1.0 cu yd
Capacity, rounded0.8 cu yd1.15 cu yd
Weight empty320 lb420 lb
Hopper constructionPolyPoly
Spreading width3-30 ft (may vary depending on material)
Spinner size15"15"
Auger diameter2.5"2.5"
MaterialSalt, sand, granulat/mixed (max 5/16" ∅)
MODEL550850
Overall Width A 120 cm120 cm
Width B90 cm90 cm
Minimum truck bed length C120 cm170 cm
Height D92 cm92 cm
Capacity, struck500 l710 l
Capacity, rounded630 l880 l
Weight empty145 kg190 kg
Hopper constructionPolyPoly
Spreading width1-8 m (may vary depending on material)
Spinner size390 mm390 mm
Auger diameter65 mm65 mm
MaterialSalt, sand, granulat/mixed (max 8mm ∅)

TRAINING AND ARTICLES

Get more out of your spreader by reading related articles and manuals